Search
Close this search box.

Explosion Protection in Industrial Plants

Explosion Protection in Industrial Plants - REMBE
Explosive atmospheres usually occur in process engineering plants such as silos, elevators, mixers, mills, and conveyors. In the presence of effective internal or external ignition sources, there is a risk of explosion in the respective plant as well as a risk of propagating the explosion into connected plant components.

Explosion protection is concerned with reducing the effects of an explosion and is the central, most frequently applied explosion protection concept. The explosion protective measures include conventional explosion venting using explosion vents, flameless venting, explosion isolation, and explosion suppression. But which protective measure is applied to which plant component?

Plant example 1: Filters

Explosion Protection in Industrial Plants - REMBE

The risk of explosion is particularly high in filter systems. The very fine dust is distributed in the filter and can trigger an explosion if an ignition source is present. Filters indoors are therefore protected with flameless venting, filters outdoors with explosion vents.

If there are traffic routes for people and vehicles in the vicinity of explosion venting, add-on modules for explosion vents such as the TARGO-VENT are used. TARGO-VENT limits the opening angle of the explosion vent and directs explosion pressure, flames and heat into defined areas. In this way, safety areas can be reduced.

Flameless venting is an economical and effective solution for protecting filters indoors. Different manufacturers use various technologies to ensure flameless venting. REMBE, the inventor of flameless venting, offers three different products: Q-Rohr, Q-Box, and Q-Ball.

The special mesh filter used in the products cools down flames efficiently so that no flames or pressure escape. The pressure increases and noise levels indoors that are typical of an explosion are reduced to an acceptable harmless minimum, ensuring the protection of man and machine. In addition to the special stainless steel mesh filter, Q-Ball, Q-Rohr, and Q-Box consist of an explosion vent with integrated signaling, which informs the process control system about the response of the explosion vent. Flameless venting is a good alternative to suppression devices for small-volume applications up to around 100 m³ – especially in terms of maintenance costs.

Explosion vents differ in shape and structure depending on the application

Explosion vents can protect outdoor filters. In the event of an explosion, the explosion vent opens, reducing the overpressure in the vessel and releasing the explosion outwards.

As no two processes are identical, there are various types of explosion vents that differ in terms of shape, material, temperature, and pressure/vacuum resistance. Even hygienically demanding processes can be protected nowadays with explosion vents.

Plant example 2: Spray dryers

Dust, which is often flammable, and oxygen are always stirred up in spray dryers, whether in the food, chemical, or pharmaceutical industry. The most frequent ignition sources in spray dryers are glowing embers, damage to rotary nozzles, hot bearings, or sparks due to an imbalance.

Take particular care to protect yourself from “overengineering”. Which protection measure makes sense for your plant depends on the volume of the spray dryer to be protected, its respective installation site, and strength.

Spray dryers are usually protected with a combination of explosion isolation systems and conventional venting using explosion vents. Flameless venting is used when free venting is not possible. The special EGV HYP and ERO explosion vents are used in hygienically demanding processes. The connecting pipelines are usually isolated. The aim is to close these pipelines in the event of an explosion in order to prevent the propagation of pressure and flames and thus protect adjacent plant components.

Plant example 3: Conveyors such as elevators

REMBE extinguishing barrier Q-Bic

There are various venting options for a wide range of conveyors. Due to the functional and design-based conditions, elevators represent a special source of danger. Conveying a large amount of (combustible) bulk material carries a high risk of explosion. As with the previously mentioned plants, the elevator legs are usually protected outdoors with explosion vents and indoors with the REMBE Q-Box or the REMBE Q-Ball.

Depending on the conditions at the installation site, a combination of conventional and flameless venting can also be the right safety concept. Quench valves can be installed to prevent explosion propagation via connected aspiration lines. The REMBE Q-Bic extinguishing barrier is usually used to isolate the conveyors upstream or downstream.

Based on the VDI guideline, REMBE has developed a comprehensive protective system for elevators: ElevatorEX The first type-tested complete protective system for elevators offers a suitable solution for all types of elevators. Designed primarily for very high elevators, it combines the advantages of conventional venting with flameless venting and explosion suppression technologies.

Plant example 4: Silos

Silos, in particular, are critical plant components when it comes to explosion protection. An explosive dust-air mixture prevails when filling a silo.

Flameless venting Q-Box and Q-Rohr

If it is not possible to exclude all potential ignition sources, silos must be protected constructively. Outdoors, silos are generally vented with explosion vents – different types can be used depending on the type of filling. Indoors, the REMBE Q-Box or the REMBE Q-Rohr will be installed for flameless venting.

As a rule, explosion isolation is implemented using quench valves. These completely close the pipelines within a few milliseconds; the explosion cannot propagate further.

Conclusion: The explosion protection concept can only be safe and economical if the entire system is observed and the individual protective measures are coordinated. This requires a systematic approach as well as observance of system-specific boundary conditions and knowledge of methods for assessing safety-related parameters.

Share this article

This article is published by

REMBE® Company Profile – Consulting. Engineering. Products. Service. REMBE® is a safety specialist in explosion safety and pressure relief. It provides customers in all industries with safety systems for their plants and equipment. All products...

Related Articles