With increasing abrasion of the filter elements, the dust content in the exhaust air may rise and lead to increased environmental pollution. The continuous dust measurement (mg/m³) is also regulated for this process. This official regulation is fulfilled by the plant operator with the installation of a calibrateable, electrodynamic measuring device.
Customer: Food manufacturer (Germany)
Product: Dairy product powder
Permitted limit: 20 mg/m³
Installation location: Clean gas side after a dust cyclone
Function: Continuous dust measurement
The ProSens system can be calibrated and continuously monitors clean gas sides after filter elements for permissible dust concentrations.
With the Dosed-Reference-Method developed by ENVEA – SWR engineering, the ProSens can be calibrated quickly and safely at the customer’s plant.
For this, only a representative sample of the customer’s filter dust, the specification of the desired limit value with regard to the dust concentration and some process data such as volume flow are required in advance. With this information, a special dosing device can be adjusted in advance, with which the technician then sets the desired dust concentration for the customer to be calibrated as a reference at the customer’s site.
- Robust, durable, process-reliable sensor (ProSens)
- Easy, fast and verifiable calibration (Dosed-Reference-Method)
- Assured compliance with permitted limit values (mg/m³)
Sign up for Instrumentation & Control E-Updates
Recent Instrumentation & Process Control e-newsletters
Read our last “Instrumentation & Process Control” e-newsletter campaigns here:
ENVEA – SWR engineering specializes in measuring systems for bulk material and solids: Measurement of mass flow, moisture, dust and velocity as well as level detection ,flow/no flow detection and screen break detection. Good and simple solutions – for a wide range of industries involving the processing of solid materials. Made in Germany.