The plate type Bulk Solids Cooler is conceptually a very simple piece of equipment. It consists of an inlet hopper, one or more plate banks in parallel and a mass flow device.
The product enters in the top, forms a cone above the plates and flows between the equal flow channels in gravity flow. The cooler operates with the product level always maintained above the plate banks. So it operates always full of product.
The mass flow device creates equal movement of bulk solids over the whole cross-section of the cooler. Cooling water flows through the plates. A relatively simple level control at the top (not in our scope) generates a 4- 20 mAmp signal to control the mass flow device at the bottom in such a way that what comes in at the top leaves at the bottom within maximum and minimum inlet hopper level set points.Click here for more informationClick here for more Thermal Solids Processing related releasesFind manufacturers of Thermal Solids Processing systems
Sign up for Thermal Solids Processing E-Updates
Recent Thermal Solids Processing e-newsletters
Read our last “Thermal Solids Processing” e-newsletter campaigns here:
Mosman Stainless Steel BV has a rich history that dates back to 1879. We started by the name “Construction & Heating Industry J.C. Mosman” as a supplier to the textiles industry. At the end of the 1970's this industry moved to the Far East, which caused Mosman to find new challenges. We have since then specialized in producing stainless steel ...