Indeed some of Primasonics most challenging but successful applications were within silos which contained dry materials such as cement. Primasonics have solved cement storage silo problems in over 40 countries worldwide.
The two main problem areas within hoppers and silos are:-
- Ratholing – where the material builds up on the sidewalls causing severely reduced “funnel flow”, which also restricts the silo being used to its full storage capacity.
- Bridging – where the material bridges over the outlet area either severely restricting flow or stopping it completely.
Irrespective as to whether the cement bulk storage facility is under 500 kg or over 30,000 kg capacity Primasonics® Audiosonic™ Acoustic Cleaners have eliminated both of these problems.
Typical examples range from small 20 tonne capacity internal pre-packing hoppers right up to 30,000 tonne capacity cement silos.
Where the problem is ratholing with the material building up on the sidewalls, a low frequency, larger Primasonics® Acoustic Cleaner is mounted on top of each silo to dislodge and thereafter, eliminate the build-up.
These units can be located at any position on top of the silo, as sound waves travel at over 344 metres per second and in a 360° radius. Generally speaking they are mounted on top of an existing inspection hatch, thus installation is simple and inexpensive.
Moving on to silo and hopper discharge, Acoustic Cleaners can help in preventing material cross contamination. In such applications one of the smaller Primasonics® Audiosonic™ Acoustic Cleaners with higher frequencies is employed. The higher the frequency the shorter the wavelength and so all the acoustic power created by the Wave Generator is concentrated over a much shorter range – say between 1 and 5 m. Therefore a higher frequency Primasonics® Audiosonic™ Acoustic Cleaner mounted just above the discharge will prevent material bridging and ensure even material flow at maximum rates.
It is important to note and understand several main advantages that Acoustic Cleaners have over alternative methods, which have been employed to try and aid material flow. Primasonics Acoustic Cleaners operate at frequencies very much higher than the resonance frequency of steel, ceramic lining, concrete etc. Therefore Primasonics Acoustic Cleaners are guaranteed not to cause vibrational damage to any vessel or structure. This is quite unlike vibrators, which by their very nature and method of installation, cause vibration and stress weaknesses within the vessel or structure to which they are attached. The vibration resonances first have to pass through the vessel wall before reaching the material. With the Acoustic Cleaner, the higher frequencies are directly absorbed into material giving 100% efficiency.
Air cannons/blasters seek to effect a very localised cure for a blockage problem, which has already occurred. In many cases the air cannon simply “blows” a localised hole through the blockage, necessitating the installation of many air cannons within the general problem area. It is generally true to say that one very rarely finds a single air cannon in effective operation. This is totally the opposite with Primasonics Acoustic Cleaners but then we approach the problem with a totally different philosophy – by preventing the build up from occurring in the first place.
Acoustic cleaners are extremely simple in their operation, requiring only normal plant compressed air for their initial energy source. Compressed air enters the Wave Generator and forces the only moving part, the ultra high-grade titanium diaphragm to oscillate very rapidly within its specially designed housing. These rapid oscillations create the base tone and the various different bell sections convert, amplify and distribute this base tone into a range of different key fundamental frequencies. Primasonics have selected seven such key fundamental frequencies for their Audiosonic Acoustic Cleaner range from 60 Hz to 420 Hz. The acoustic cleaners only require activating for a few seconds at periodical intervals.
Primasonics® Audiosonic™ Acoustic Cleaners are aiding material flow from hoppers and silos in such diverse industries as Cement, Gypsum, Flour, MDF Wood Products, Ceramics, Chemicals, Petrochemicals and Power Plant. They are also employed in a range of ancillary plant such as filters, cyclones, fans, ductwork and steam/power generation plants.Click here for more information about Primasonics®
Sign up for Storage & Transportation E-Updates
Primasonics® International is currently the worldwide leader in Acoustic Cleaning Technologies. Since it was founded in 1998 the company has continually won awards for innovative technology and export success. Primasonics founder, Donald Cameron has a lifetime experience in specialist materials processing industries and is renowned for his ability ...