There are several important features that we included for this specific bagger
1. Surge Hopper
A simple item, such as a hopper, can be overlooked when designing a 50-Lb bagging system. The purpose of a surge hopper above the bagger is to provide residence time for the powder to settle. This settling period provides a more consistent flow of material at the bagger, thus providing more consistent weigh-ups. If you would like to know HaF’s design setpoint for residence time, email us and we will work with you on your application
2. Variable Pitch Screw Auger
For bagging applications, the screw auger design is critical. HaF has several different auger designs, depending on bulk density and flowability (sluggish or free-flowing) of the material.
For dairy applications involving bagging (bag filling) spray-dried powders, HaF has a specifically designed auger setup tailored to both accuracy, poor flowing materials, and flood filling materials. We provide different auger profiles specifically suited to customers’ powder.
3. Inflatable Filler Head
The operator places an open-top bag on the filler head and uses a foot pedal to start the cycle. The inflatable filler head expands to seal the bag inlet. The bag is held in place on the filler head, which is connected to the load cell. The weigh up begins.
4. Shutoff Valve and Accuracy
At the discharge of the screw auger, we utilize a shutoff quick clean valve that will stop the flow of powder in order to meet the tolerances of the weigh up.
By utilizing the specifics of HaF’s designs, and the multipoint features of the feeder, HaF typically meets the weigh up the accuracy of +/- 1%, easily. We have special designs that can achieve 0.1% accuracy. Contact us if you require this level of accuracy and we will share with you how we can achieve it.
5. Cleanability
For our recent customer’s feeder and all our sanitary designed feeders, we utilize our design concept of “Tool-Free Quick Take Apart”. HaF specializes in quick clean and easy to clean equipment. It is very important in sanitary applications that the operator can easily disassemble and clean the equipment and then reassemble, in as the shortest amount of time as possible. We get it. And we have answered.
It is good to partner with a company that is flexible to adapt to your key important design specifications. The point is to listen to the customer and respond with creative solutions. Every application is unique.