Depending on the size of the particles, storage method, temperature, and many other factors, some materials can hold more water than others.
The moisture content influences many processes, so let us focus on a common example: the measuring of materials by weight. As the moisture naturally varies during material storage, knowing it allows us to determine exactly how much dry material is in the measured amount.
The solution is simple, as using an online sensor makes it possible to know the moisture in the material. Measuring the water content is an indirect measurement, meaning that it is calculated from another measured property, so to do this accurately other factors need to be kept as constant as possible:
- Material composition
- Particles size
- Pressure on the sensor
- Flow speed
- Position of the sensor
For this reason, it is key to calibrate the moisture sensors for each material after the final system installation. The calibration must be realized by accurate lab tests, as calibrating any sensor with another different sensor can cause a sum of errors resulting in incorrect calibrations, defeating the initial objective completely.
Independently from the measurement method used in the process, it is critical to completely remove moisture from the sample to reach the dry weight during the lab test, as this is what will be used while calibrating the sensor to define the moisture reported by the sensor.
But are all the sensors equal?
There are many moisture sensors available on the market, and these different technologies can be summarised into five categories:
|Resistive||Low cost, low repeatability, affected by impurities and temperature, limited range.|
|Capacitive||Inexpensive, marginally more reliable than resistive, affected by water impurities|
|NIR/Infrared||Contactless, expensive, fragile, affected by dust, color, temperature, high maintenance costs, measure only surface material.|
|Nuclear||Very expensive, very accurate, require safety maintenance, requires a highly trained operator, measure large volumes.|
|Microwave||Analog: High sensitivity to water, affected by salts and impurities, nonlinear calibration. Reduced resolution at higher moisture contentsDigital: Accurate, high sensitivity to water, not affected by impurities, cost-effective, simple to calibrate.|
An essential, often overlooked, difference in digital microwave technology is the linearity and stability of the output. Resistive, capacitive, and analog microwave sensors have a nonlinear output making them very difficult to calibrate as they require numerous points to design the curve. Nonlinearity also implies low accuracy at the wet and dry end of the scale (Figure 1).
Sensors with a digital measurement technique have a linear output, meaning that the sensor reading and water content are directly and proportionally related. This method allows systems to achieve optimal calibration with a few points. In theory with a linear system, it is possible to achieve calibration with only two points.
- After these considerations, it is possible to define the ideal requirements of the moisture sensor:
- In-line with multiple readings per second, providing quick feedback for the control to adjust every batch.
- Robust, made with high-quality materials to withstand tough industry conditions.
- Linear output, stable over time, accurate in every condition, and simple to calibrate.
- Store multiple calibrations to be used with different materials.
- Ability to measure the flow of the material.
- Unaffected by dust, color, or variations in salt and mineral content.
- Self-contained and easy to integrate into existing systems.
- Low maintenance and cost-effectiveness.
- Able to monitor and configure remotely for flexible connectivity and analysis.
Thanks to the expert research and development team at Hydronix, all the above characteristics can be found in Hydronix microwave sensors which incorporate a unique digital microwave technology made to last in the harshest conditions.
Hydronix is driven by the belief that by helping your success, we help to build a more sustainable future for our children and the generations to come.
For these reasons Hydronix, with its 39 years of passion and expertise, provides the best digital microwave moisture sensor technology.
Hydronix is present in over 65 countries around the globe, providing a network of expert engineers on the field speaking your language.