Close this search box.

Undesired Deblending and Separation in Processes and Equipment 2024

Undesired Deblending and Separation in Processes and Equipment 2024
Undesired Deblending and Separation in Processes and Equipment 2024

Course Dates

24 and 25 January 2024

The course will run online over 2 sessions; each session will start at 09:00 until 12:00 hrs UK time; both sessions need to be attended to complete the course.

Day 1 covers Characterisation of bulk materials, Mechanism of separation, Methods of prediction for bulk segregation

Day 2 covers Segregation in Industrial processes, Design methods to counter segregation, Latest modelling approaches

Both days provide the opportunity to discuss operational issues with the presenters and other delegates.

Course Fee

£500  full fee per delegate. Discounted rate £437.50 per delegate.

Early Bird ** register before 31 December 2023 to receive 2023 fees of  £405 per person**

Discounts are available for group bookings and returning delegates.

Course overview

The issue of de-blending (segregation) of bulk particulates is one that afflicts many diverse industry sectors.  For single materials and blended materials the presence of segregation within a process can be apparent as fluctuations in bulk density, chemical composition, shifts in size distribution or even unpredictable flowability issues.  These types of problems invariably lead to the generation of waste through out of range product weights (tablets/ pack fill), poor processing characteristics or variable quality end products in general.

This short course covers:

  • Identification of the most commonly encountered segregation mechanisms
  • Examples of how segregation has occurred in plant
  • Techniques that can be applied in plant design to minimise these effects

Different types of segregation will also be identified; air-induced, rolling, surface effect, percolation.

Subjects covered

During the course discussions will take place to highlight material types that are most at risk of segregation and the most commonly encountered mechanisms of segregation in process plants.  The influence of plant design and operation on the severity of de-blending will be covered and the use of counter measures will be dealt with and illustrated using industrial examples.

Is this for me?

If you are a plant designer, plant manager or work in maintenance, this course will improve your ability to deal with the design and troubleshooting of plants.

You’ll also benefit if you are from operational staff or senior management through a better understanding of what can go wrong and how to make your plant as efficient and trouble-free as possible. The course is ideal for those new to materials handling, those who require an update on the subject, or those who need a working knowledge of a wide variety of materials handling technologies.

Course team

The course leader is Dr Vivek Garg, whose interests lie in powder flowability;

Contributions may also be made from the rest of the Team, including
Mike Bradley, Professor of Bulk and Particulate Technologies and Director of The Wolfson Centre. He has worked internationally on design and troubleshooting of bulk solids handling as a commercial consultant and research expert for over twenty years;
Dr Baldeep Kaur, whose interests lie in characterisation and transportation of bulk materials;
Dr Atul Sharma, whose interests lie in pneumatic conveying systems.
Dr Susantha Dissanayake; whose interests lie in segregation of materials and chemical engineering.

Please note that The Wolfson Centre reserves the right to substitute leaders of equal quality should this be dictated by circumstances beyond their control.

In-Company course

This course can be delivered as an In-Company course on line at a time to suit operational requirements.

These are proving to be a popular option for companies who have a number of personnel who would benefit from education in the subject area, for 3 main reasons:

  1. Cost: It is more economic for us to bring the course to you, than for you to send several staff out to us;
  2. Relevance: We can tailor the course programme to suit the operations you have in your plant, hence reducing the amount of material which is not directly relevant;
  3. Convenience: We can run the course when it suits you, even over several separate days rather than in a block if it is better for you.

If you are interested in discussing your requirements, please contact us.

24 Jan 2024 - 25 Jan 2024

Share this event

This event is published by

“Providing Cost-Effective Solutions to Industrial Problems” The Wolfson Centre for Bulk Solids Handling Technology is part of the School of Engineering at The University of Greenwich at Medway, Kent, UK and has specialised in solving materials handling problems since 1973....

Promoted video

Upcoming events