We are manufacturer of Special Wear Resistant bend:
This elbow design resembles a standard short-radius elbow with a large expanded chamber between the inlet and discharge of the elbow. After the inlet, a gradually larger diameter creates an area expansion within the elbow and a deceleration zone for the incoming particles. This slow-down leads
to the formation of fluidized bed in the product-to-product primary impact zone. The fluid bed constantly moves upward toward the discharge and re-acceleration zone at the elbow exit.
The Larger area inside the elbow inlet creates a low pressure zone that draws the product from the primary impact zone back across the elbow’s bottom toward the inlet and into the main product stream. This allows a complete clean-out that is less sensitive to the actual conveying velocities than other elbows. It is a viable with a 90- deg. angle.
PROMOTED
