Bulk Solids Handling & Processing Innovations
These sensors are commonly used as a broken bag detector in baghouses and to detect leaks or excessive particulate matter in cartridge filters, bin vents, and cyclones.
BinMaster brings a sense of simplicity to customers seeking basic operation and single-point particulate monitoring. The Dust Alert with integrated electronics and sensing probe utilizes inductive electrification technology to detect and alert—via an alarm relay or 4-20 mA output—when dust emissions exceed a preset point. Designed to save time, reduce maintenance, and prevent downtime, the Dust Alert DD-3000 is ideal for baghouse leak detection or installed in stacks, ducts, or pipes.
For a quick overview of the Dust Alert watch this 2-minute video or read the DD-3000 brochure.
As particles flow past a sensing probe, they induce a charge into the probe that creates small electrical currents in the picoamp (pA) range. The signal is processed by the sensor’s integrated electronics through a series of algorithms that convert it into an output proportional to mass, resulting in a highly accurate dust measurement output. Inductive electrification is extremely sensitive and minimizes the influence of sensor buildup, particulate velocity change, or temperature drift.
Alerting to increased dust emissions can improve productivity. Instead of routinely inspecting for leaks, employees are automatically alerted, saving time on manual inspections. The sensor outputs can be tied to process control. Relays can be set to turn off a process immediately when dust levels exceed standards. Preventive maintenance can be scheduled due to early warning of leak detection to prevent unscheduled shutdowns.
These instruments are extremely reliable. A fully-insulated probe protects against false alarms caused by moisture, buildup, or conductive particles – and they do not require a costly air purge. Induction sensing for baghouses and dust collectors is typically maintenance-free with superior performance over technologies sensitive to buildup that may cause false alarms and require frequent cleaning.
An integrated single-piece design is fast and easy to install and configure with no special alignment or structural support and has a low cost of ownership. This ensures great value and provides a fast return-on-investment with quality leak detection in a reliable device that can cost-justify monitoring all sizes and types of dust collectors.
Cement: Replace manual inspections with an alert system using the DD-3000 in individual baghouse compartments or in small dust collectors.
Mining: Foundries, steel, and aluminum plants can apply the DD-3000 on each compartment of the baghouse to maintain filters in optimal condition and replace them as needed before emissions exceed regulatory standards.
Asphalt: Prevent false alarms with a DD-3000 in these hardworking baghouses prone to moisture and sticky particulates.
Chemicals: Decrease the need for preventive inspections, emergency repairs, and control maintenance costs by reducing emergency and downtime hours with early detection.
Carbon Black: Reduce maintenance and repair or replacement costs with the low-maintenance DD-3000 installed in baghouses and dryer drums.
Wood: Sawmills or pellet producers use the DD-3000 to alert to baghouse leaks in a timely manner to optimally replace filters with minimal downtime.
Processing operations that struggle with the challenges of inventory management and timely replenishment of all types of solids and powders can monitor silo levels on their smartphone, tablet, or desktop with complete solutions from BinMaster. A complete suite of continuous ...
SINFINES FACTORY is a solid reference for companies involved in the handling of bulk materials, from simple advice to customized engineering projects. More info >
Makes your business flow. Hethon is a worldwide specialist in powder and liquid dosing, especially for substances that are difficult to dose. More info >
Bulk solids handling, conveying, storage, feeding, dosing, discharging, filling solutions from single equipment to complete turnkey systems. More info >
CST is the world’s leading manufacturer of dry bulk storage silos and aluminum domes and vaults – all from one source. More info >
Manufacturer of rotary valves, diverter valves, and other related components for the bulk solids handling industry for more than 45 years. More info >
Providing custom engineering solutions, and the latest technology to manufacturers in the food, beverage, plastics, and chemical industries. More info >
For over 60 years we have provided protection solutions that can suppress, isolate and vent combustible dust or vapor explosions in process industries. More info >
Optimizes pneumatic conveying systems by reducing waste and cost, minimizing downtime, and improving productivity with high-performing components. More info >
Hydronix is the world's leading manufacturer of digital microwave moisture measurement sensors for a wide range of industries. More info >
Process automation systems for receipt-to-process bulk material transfer and Industrial Vacuum Cleaning Systems for high volume recovery of many materials. More info >
Weighing technology is one of the most important factors for the smooth running of your production processes and high product quality. More info >
Newson Gale; Manufacturers of static control equipment and solutions for hazardous area explosion protection in industrial processes. More info >
Global market leader in Screw Conveyors and amongst the most prominent players in the field of Bulk Solids Handling & Processing Equipment. More info >
Jenike & Johanson is the world's leading company in powder and bulk solids handling, processing, and storage technology. More info >
High-performance rotary valves and airlocks for metering, feeding, and airlock in bulk material processing and pneumatic conveying applications. More info >
Smart Elbow® deflection elbows stop material from impacting the elbow wall, preventing: abrasive wear, degradation & heat-related build-up & plastic streamers. More info >
Thayer Scale is a leading global manufacturer of equipment used for continuous weighing and feeding of bulk materials for a wide variety of industries. More info >
Eastern Instruments designs and manufactures a variety of devices that both measure and control the flow of industrial bulk solids. More info >
REMBE® is a safety specialist in explosion safety and pressure relief. It provides customers in all industries with safety systems for their plants and equipment. More info >
Coperion & Coperion K-Tron supply equipment and systems, such as extruders, feeders, pneumatic conveying & components. More info >
“Trusted by the best” Dinnissen has become a world leader in process technology in the world of powders, particles and granules.
More info >
Acmon Systems is an engineering company with manufacturing excellence specializing in the field of Premium Bulk Handling material solutions in a vast range of industry sectors. More info >
Kason Corporation is dedicated to solving the toughest screening, drying and cooling problems while holding quality, safety and reliability paramount. More info >
Flexicon equipment conveys, conditions, discharges, fills, dumps and/or weigh batches powder and bulk materials dust-free. More info >
Leading global provider of powder handling systems & process containment technologies for the pharmaceutical, chemical, food, and cosmetic industries. More info >