Manufacturers of instrumentation and process control systems

Process control includes the automated control of continuous or batch processes with computers. The hardware components of the process control systems, such as measurement and control components, are called instrumentation. There is a broad range of measurement and control devices needed for any dry material handling process. Process instruments measure, analyze, regulate and control industrial processes and therefore contribute to increasing the efficiency of process plants and improving the product quality. High-quality processes are essential in the process industry. Only then you accomplish the required results. Instruments and control systems include: (Solids) flow, level, moisture, detectors, samplers, analyzers, dust monitors, process recorders and process controls. Find manufacturers of instrumentation and process control systems in our Equipment Guide.

Recommended manufacturers

Nathan Grube

BinMaster Level Controls

Ask a question

Nathan Grube is Regional Vice President of Sales for BinMaster covering the central United States including a ten-state area stretching from North Dakota to Texas. He joined BinMaster in 2001, already equipped with five years of experience in agricultural equipment. Grube has worked with end users, distributors, and OEMs across the US. His vast expertise covers many industries including agriculture, aggregates, cement, plastics, and mining, among others.
read more read less
Pablo Balan

Boss Products, LLC

Ask a question

Design Engineer, Project Manager, Territory and Sales Manager with 40+ years of experience in capture at source designs, sales and installation projects for high and low vacuum and dust collection and filtration systems and explosion and fire mitigation in dust collection systems.
read more read less
James Seagraves

Eastern Instruments

Ask a question

James is a veteran of solids flow measuring process design with over 27 years of experience under his belt. He is a recognized expert in flow-metering and feeding applications in a wide variety of sectors across a multitude of industries, including the food, chemical and building supply industries.
read more read less
Neal Cass

Hydronix Ltd

Ask a question

After gaining his degree in Electronic Engineering from the University of Southampton in England, Neal spent 10 years developing and commissioning control systems for a major international food process system manufacturer. In 2007 he started working for Hydronix as a Customer Service and Software Development Engineer before becoming Sales Manager in 2011. Neal is very knowledgeable in the concrete and organic industry.
read more read less
Carrie Hartford

Jenike & Johanson

Ask a question

Carrie Hartford is the Technical Sales Manager and Senior Project Engineer in Jenike & Johanson’s office in California. For 15 years, she has been solving challenging bulk material flow related problems around the world. Typical projects include the analysis and design of bins, hoppers, feeders, and transfer chutes. From 2012 – 2014, she opened and established an engineering office and laboratory facilities in Perth, Western Australia. Internationally she publishes and presents technical papers, participates in conferences, and presents numerous short courses in the field of bulk solids flow. Carrie has a Mechanical Engineering degree from the University of California, Santa Barbara and an MBA from Azusa Pacific University in California. She is a licensed Professional Mechanical Engineer in the State of California.
read more read less
Robert Meirick

Material Transfer

Ask a question

Robert brings over 25 years of experience for bulk material handling and material processing equipment to Material Transfer. At MTS, he is responsible to fostering new business opportunities while nurturing account relationships. His depth of experience and industry knowledge allows our Team to meet the growing needs of our customers as we continue to provide the highest quality systems to the marketplace.
read more read less
Adrian Fordham

MoistTech Corp.

Ask a question

Adrian is currently the President of MoistTech Corp and has been with MoistTech Corp. since 2010 starting as the Sales Manager. Bringing to the company many years of experience and expertise in multiple industrial moisture applications, Mr. Fordham has vast knowledge in Near-Infrared moisture sensing and detection technology.
read more read less
Chuck Johnson

National Bulk Equipment, Inc.

Ask a question

Chuck Johnson is the director of sales at National Bulk Equipment, located in Holland, Michigan. His professional experience includes over 25 years in the design, engineering, & sales of bulk material handling equipment & systems. Johnson holds a BS in mechanical engineering from Michigan State University.
read more read less
Jürgen Opdenhoff

Opdenhoff Technologie GmbH

Ask a question

With over 32 years of experience in raw material handling and a specialization in weighing and mixing control systems, I provide comprehensive solutions that encompass the entire process—from raw material intake to the final product—all delivered from a single source. Supported by a team with a combined 140 years of experience and backed by a company with over 55 years of tradition, we develop and implement tailored systems that guarantee the highest standards of precision, efficiency, and safety. Our integrated solutions combine cutting-edge technology with deep expertise to achieve precise dosing and mixing, leading to optimized product quality, significant cost savings, and enhanced production efficiency. We manage every phase of the process, ensuring a seamless and reliable implementation for our clients.
read more read less
Süleyman Salihler

Polimak

Ask a question

Süleyman is General Manager of Polimak with more than 20 years of experience in design, engineering, manufacturing, and marketing of bulk solids handling systems. He leads the organization to provide problem-free solutions from single equipment to complete turnkey systems for a wide range of industries. Pneumatic conveying systems, dust collectors, rotary valves, big bag dischargers, batching & dosing systems, storage silos are some of the components designed and produced by a highly qualified engineering team in the organization. Holding a Bachelor's Degree in Mechanical Engineering, Süleyman's background includes software development, industrial automation, and IoT technologies. This facilitates Polimak's vision of providing data-driven smart process technologies for the bulk solids handling industry in the new digital age.
read more read less
Matthias Hofmann

singold gerätetechnik gmbh

Ask a question

Matthias Hofmann is Technical Director at singold gerätetechnik gmbh. The company specialises in the development and production of pneumatic knockers and other products for the bulk solids industry such as flap shutters and double-flap sluices. As a Dipl.-Ing.(FH), Markus Hofmann initially contributed his extensive knowledge in plant construction and mechanical engineering as a design engineer at various mechanical engineering companies, including in the position of chief engineer. Since 2019, he has been further developing the product range at singold gerätetechnik gmbh and supporting customers in finding the optimal solution for their plant.
read more read less
Karen Van Aelst

Stuvex International NV

Ask a question

Karen Van Aelst, ing., is a seasoned professional with a rich background in sales and engineering, particularly within the dry bulk handling and process industry. Over the course of 12 years, she honed her expertise in selling installations tailored for these sectors. In 2010, Karen transitioned to StuvEx, where she embarked on a decade-long journey as a sales engineer specializing in explosion protection. Her role encompassed managing sales activities in both BeLux and Germany, showcasing her proficiency in navigating diverse markets and establishing strong client relationships. Since 2019, Karen has assumed the position of Product Manager at StuvEx, where she is entrusted with the vital responsibilities of overseeing the development and market realization of explosion protection products. Her extensive experience in sales, coupled with her engineering background, positions her as a valuable asset in driving innovation and ensuring the safety of industrial environments. Karen's dedication and expertise continue to play a pivotal role in the success of StuvEx in the field of explosion protection.
read more read less