AKO Pinch Valve for Welding Flux Application

AKO Pinch Valve for Welding Flux Application
A wheel manufacturing company operates up to 600 cycles per day (30 welds/hr). The manufacturer was utilizing an underperforming pinch valve with a very thin sleeve.

Application: Welding Flux for Wheel Manufacturer
Description: AKO valves used to control welding machines
Valves Used: Type VMC (VMC32.03X.50N.50- 1-1/4”)

The sleeve was wearing out quickly, causing frequent downtime and out of spec production runs. The company decided to purchase AKO pinch valves, VMC model. The AKO valves were installed for 2 years and the natural rubber sleeves have not been changed.

The VMC Pinch Valves are appropriate for a flux application. The VMC Series are available in the following bore sizes, 10mm to 100mm. The VMC Series valves are versatile, compact pinch valves ideal for abrasive materials for many other industries. There are many types of sleeves (Natural Rubber, EPDM, Silicone, Viton and Nitrile) which make this valve a good option. Also, FDA-approved sleeves can be requested.

The VMC Series valve is made up of 3 components, valve body, the connection ends, and sleeve.  The sleeve is typically the only part that needs to be replaced. The sleeves can be replaced on-site in less than 15 minutes. The sleeve lifespan is determined by the number of cycles, abrasion of the material, and material pressure. The sleeves can last up to 500,000 – 750,000 cycles.

This article is published by

Are you looking for a reliable and cost-effective pinch valve solution? If this is the case, then you have found exactly the right place with AKO Armaturen & Separationstechnik GmbH, the global market leader for air actuated pinch valves. AKO Armaturen is a family-run company, which has been manufacturing reliable, cost-effective and innovative ...

AKO Armaturen & Separationstechnik GmbH