The system can be configured as the JMX50 jet mill alone (with the internal air classifier), the ACX50 air classifier alone, or both JMX-ACX systems. The equipment is very compact, requires small amount of input material and the operating system provides fully automatic test procedures with registration of almost all operating parameters in the control unit.
The process capacity is typically in the range of few kg per hour, which provides a significant flexibility regarding test work with small material portions, different settings and operating parameters. The JMX jet mill is placed on the load cells, which allows optimisation work regarding optimal filling of the mill chamber. It also has a built-in air classifier providing the particle size control.
Finally, the particle size distribution can be measured at the outlet by an on-line analyser providing constant size control of the produced particles. This measurement can be done on all streams in the system like the feed to the classifier or the jet mill, jet mill product, as well as the classifier coarse and fine fractions. All parameters are registered in the system and can be exported to Office Spreadsheet after testing to the local PC or via Internet connection to any other user. The system is also able to process explosive materials in the air and the inert atmosphere.