The nature of an overlap splice generates additional stress on the bolts in many ways. The two layers of belting are subjected to uneven contact force from the drive pulley. This makes the inside belt flex more than the outside belt. Additionally, the weight of the loaded elevator buckets pulls on the splice bolts. The bolts can snap or the heads can pull through the belt. A compromised belt splice can diminish efficiency and in the worst case, drop a fully loaded belt with buckets down the elevator leg casing and into the boot.
The solution was twofold and encompassed using 4B brand Reference 70 elevator bolts. The elevator buckets normally secured to the belt used 5/16” diameter bolts. 4B Components supplied larger 3/8” diameter bolts for use on the overlap splice. The larger diameter bolts have a greater tensile strength to tolerate the environment of an overlap splice. Secondly, the Reference 70 bolts incorporate a unique oversized oval washer into the bolt head, which covers a large surface area on the belt, therefore spreading the pull-through force over a greater surface area. No other style of elevator bolt is able to cover such a large area of belt.
- The use of the 4B brand Reference 70 bolt system helps prevent bolt head pull through at the overlap splice on elevator leg belts
- The overlap splice is much stronger and had less risk of being compromised
- Stronger bolts are less prone to snapping
Sign up for Mechanical Conveying E-Updates
Recent Mechanical Conveying e-newsletters
Read our last “Mechanical Conveying” e-newsletter campaigns here:
Founded in the UK in 1971 as a subsidiary of The Braime Group, 4B Braime Components, Ltd. has been an industry leader in developing high quality, innovative, and dependable material handling components for the agricultural and industrial sectors. 4B’s product line ranges from elevator buckets, elevator bolts and drop forged conveyor chain to level ...