PROMOTED
Pneumatic Conveying of Bulk Materials; short courses for Industry
HETHON Delivers Advanced Dosing Systems to Indian Peanut Butter Factory

Technology Zones

All Dust Collection & Air Pollution Control Explosion Protection & Process Safety Instrumentation & Control Mechanical Conveying Mixers & Blenders Packaging & Bagging Pneumatic Conveying Screening & Separation Size & Volume Reduction Solids Feeders Storage & Transportation Thermal Solids Processing Valves, Gates & Airlocks Weighing Systems & Scales
An often-cited example is a painted metal drum which stands on an insulating wooden pallet and is filled with either flammable bulk or liquids. In the moment the filled material hits the inside of the metal drum, a charge exchange takes place between the two materials which cannot be reversed if the filling speed is too high. During the filling process, the charges accumulate and discharge in a spark when a grounded object (e.g., a wrench or a person) approaches or if the breakdown voltage of the surrounding air is exceeded. The same effect applies to filling processes of various other containers such as IBC, buckets, canisters and also ungrounded parts of the plant. Picture: TIMM_IBC in industrial environment Favoured by high filling speeds (> 1 m/s) and very low conductive materials, potential differences of up to several thousand volts can occur, which can in turn lead to spark discharges with ignition energies in clearly double digit mJ range within the explosion hazardous area. To prevent this danger and according to international IEC-standards, all conductive materials, process equipment and objects need to be grounded or connected with ground potential. In practice, this often means simple grounding cables and clamps which are directly connected to the potential equalisation rail. The grounding clamp is than connected to the object to be grounded, e.g., the metal drum, and the electrostatic charges are discharged via the grounding cable to the rail. A much safer, but often more expensive option are monitored grounding control devices, which actively monitor the grounding connection and can interrupt filling processes in case of an unsafe situation. These explosion-proof devices like the TIMM EKX-products are often used during the filling of large objects, such as trucks, railcars or FIBC and have several advantages: 1.No uncertainty by continuous monitoring and displaying the grounding quality 2.Tamper-proof and failsafe due to integrated object detection and diagnosis 3.Automatic interruption of filling processes via integrated control outputs But despite all these safety critical advantages, monitored grounding control devices are only rarely used in filling processes with smaller containers. There are several reasons for this, but mostly it’s a matter of costs or a subjective (under)estimation of the explosion risks of the filling operation. However, one should be aware, that a grounding connection is only as good as the quality of its weakest link. For unmonitored cables and clamps, this means on the one hand that the grounding cables are subject to wear, which can significantly limit or even completely eliminate the conductivity. Common examples are torn off cable cores at the clamps, crushed cables, (partially) broken ring terminals at the rails or broken copper cable cores. On the other hand, incorrect use of the grounding cables, such as clamping it to a painted or dirty surface, can significantly reduce the conductivity, even without the operator noticing it. To close the gap between the unmonitored grounding clamps and cables and the safer, but only rarely used monitored grounding devices, we developed the TIMM SMART BITE LED ground indicator. This battery-powered device plugs into any two-pole cable and signals the quality of the grounding connection via three leds. This allows the operator to instantly see whether the grounding connection meets the standards and the electrostatic charges are safely dissipated. The SMART LED is built completely intrinsically safe and the integrated battery can be exchanged by the operator on site. Picture SMART LED The device can be used for all metal connection points and objects as well as mobile or stationary in a variety of combinations (clamp – clamp, clamp – ring terminal, ring terminal – ring terminal). Typical areas of use are the monitoring of connections between objects, such as IBC, drums, or canisters and earth rails, the connection between two objects and the connection of individual plant parts with the earth rail. Besides the advantage of improving existing, unmonitored grounding cables it can also reduce the effort for the regular checking of the grounding cables as the SMART LED always signals whether the cable meets the quality requirements – without someone actively measuring by hand. Picture TIMM_IBC in industrial environment It can therefore be stated that there are three different levels of grounding in hazardous areas, which differ significantly in terms of the level of safety achieved. And especially with unmonitored grounding cables, the step to the next higher safety level should be considered, since grounding indicators, such as the TIMM SMART LED, can be used to safely and cost-effectively avoid typical grounding problems.

Three Safety Levels of Grounding in Ex-Zones – SMART LED Fachbeitrag

4 November 2022
Manny filling and decanting processes in industrial environments lead to electrostatic charging of the material and the process equipment. What...
Read more
Automated moisture measurement of anthracite coal - saving time and costs through optimised sampling

Automated Moisture Measurement of Anthracite Coal – Saving Time and Costs Through Optimised Sampling

3 November 2022
Our customer is a leading manufacturer of process carbons. More than 70,000 tonnes of dry coke, anthracite, blown coal and...
Read more
Food & Beverage Solutions Sourcebook

Food & Beverage Solutions Sourcebook

3 November 2022
Kason Corporation is an innovative and dependable solution provider with over 50 years of experience, knowledge, innovation and adherence to...
Read more
Mars Mineral Awarded Contract by Contec for New Pin Mixer

Mars Mineral Awarded Contract by Contec for New Pin Mixer

3 November 2022
Mars Mineral has been awarded a contract to design and manufacture a new pin mixer for Warsaw, Poland based Contec...
Read more
Explosion Risk Regulatory Compliance - How BFM® Fitting Could Save you Thousands

Explosion Risk Regulatory Compliance – How BFM® Fitting Could Save you Thousands

3 November 2022
The financial and reputational damage that can be caused by industrial accidents has seen rapid change in both regulations and...
Read more

Latest videos

Industrial Dry Mortar

Transforming Industrial Dry Mortar Production: A Success Story with Thrakon – Ytong Group and Acmon Systems

Mineral Processing
Vortex Titan Slide Gate for Extreme Material Handling

Vortex Titan Slide Gate for The Toughest Material Handling Environments

Valves, Gates & Airlocks
Acmon Systems

Acmon Systems Powers the Most Technologically Advanced Bakery Production Facility in the Region for Stergiou Family!

Milling
The Vortex Loading Spout transforms loading operations across multiple industries.

The Vortex Loading Spout Transforms Loading Operations Across Multiple Industries

Storage & Transportation

Ribbon Blender Keeps Essential Oils of Spices Intact

Mixers & Blenders

The Global Solution for Salt Dosing in Chips Production: HETHON Feeders

Solids Feeders
View all
Controlling Moisture In Digestate

Controlling Moisture In Digestate

2 November 2022
With the ever-increasing effects of global warming on the environment, governments have agreed to reduce the carbon released into the...
Read more
Bin And Silo Level Alerts From Binmaster BM-25 Diaphragm Switch

Bin And Silo Level Alerts From Binmaster BM-25 Diaphragm Switch

2 November 2022
Grain, salt, pellets, ash. For dry bulk materials, automated switches are essential to prevent overfills, send alerts, and even start...
Read more
What Is Vacuum Mixing & Drying?

What Is Vacuum Mixing & Drying?

2 November 2022
When we talk about vacuum mixing and drying, we are talking about taking the mixer, and its contents, and removing...
Read more
Ajax Equipment's Ash Conditioners Provide 'robust' Mixing Solution for Lynemouth Power

Ajax Equipment’s Ash Conditioners Provide ‘robust’ Mixing Solution for Lynemouth Power

28 October 2022
Solids handling equipment specialist, Ajax Equipment, has supplied leading UK energy generator, Lynemouth Power, with a range of parts, including...
Read more
Aggregate Diverter Handling Corn Grits

Aggregate Diverter Handling Corn Grits

28 October 2022
These 254mm (10”) and 304mm (12”) Vortex Aggregate Diverters are used to handle the discharged corn flour from a bucket...
Read more
AWM Limited, a Suffolk-based weighing solutions provider provides new systems for GB Seeds

AWM Limited, a Suffolk-based weighing solutions provider provides new systems for GB Seeds

28 October 2022
GB Seeds, the Specialist Grain Marketing division of Agrii, are a diverse seed supplier that focuses on delivering high-quality products...
Read more
How Olam Agri Produces Superior Feed with Vacuum Coaters

How Olam Agri Produces Superior Feed with Vacuum Coaters

27 October 2022
Dinnissen has been working together with many producers for decades. We are proud to be able to welcome new customers...
Read more