Search
Close this search box.

ALVIBRA Vibratory Conveyor Technologies

ALVIBRA Vibratory Conveyor Technologies
11 Sep 2024  |
Here’s an example of how Alvibra solved specific conveying challenges and combined all of the points below in one and the same conveyor.
  • Inclined Vibratory Conveying
  • Long Distance Silent Conveying
  • Heated Conveyor for Sticky Products
  • Enclosed Ventilated Design
  • Hygiene and Cleanability

A hot sticky product, needed to be kept warm, be transported in a tight plant layout requiring a long and inclined conveying distance with high food safety and easy cleanability.

Inclined Vibratory Conveying:

The plant layout called for an inclined conveying angle of 10° and a low product inlet height in addition. Not all products are good for inclined vibration, but tests showed that a powerful vibration by a specific stroke, shape and frequency was needed for this specific product – and the Alvibra VibraDrive® offers all of that.

Long Distance Silent Conveying:

An almost 8 meter long inclined smooth transport was required too. The Alvibra patented VibraDrive® system is good for both short and very long conveying distances of e.g. 10 m, 20 m or more – and with just 1 drive. At the same time, it is a low noise vibration system, which is of high importance to the safety of the operators in most plants today.

Inclined Vibratory Conveyor, powered by VibraDrive® for good and silent long distance vibratory transport. Designed with heated conveyor bottom, hinged lids and electropolished product contact zone.

Heated Conveyor for Sticky Products:

To reduce product sticking to surface, it was discovered that if the conveyor was kept 80°C warm during operation, the product would stick less. Consequently, we integrated an oil heating system in the conveyor trough bottom.

The conveyor is designed in AISI316 stainless and has electropolished product contact surfaces to ease the cleaning and reduce product sticking.

Enclosed Ventilated Design:

Lids were integrated to keep product warm during the 8 meter long transport and to reduce heat and moist evacuation into the open room. If required, for further moist or ventilation control, the conveyor is prepared for connecting an air circulation system to each end of the conveyor.

Hygiene and cleanability:

The conveyor is designed with smooth surfaces and soft corners for easy cleaning. And clearly the conveyor and documentation is made in accordance with the EU 1935/2006 directive. The electropolished product contact surfaces further increases food-safety. The conveyor has a drain outlet for cleaning water – and the hinged lids have quick-lock for easy opening and for full access to clean and survey the entire product contact zone.

Contact us with your inquiries or for more details about our capabilities.

Mossvej 7

DK-8700 Horsens

+45 6222 7217

info@alvibra.com

www.alvibra.com

Share this article

This article is published by

Alvibra is an innovative and customer-oriented supplier of various machines and solutions including product screening, -conveying, -handling and -feeding. Vibration technology is in our blood thru more than 30 years, but we also deliver other...

Related Articles