Many plastic materials are hydrophobic. If water molecules are trapped in the polymer matrix, they will not bind to the polymer and have a negative impact on the mechanical properties of the material. Therefore, flame retardants added to the plastic products shall have possibly low moisture content; often the specification is to reach ppm level. To reach such low moisture content within reasonable drying time, the vacuum drying process shall be carried out under high vacuum and the product temperature shall be as high as the product allows. For some organophosphorus compounds for example, process temperature over 300 °C is not unusual.
The AVA HTC-VT type vacuum dryer can be well adapted to this application. The dryer is equipped with a heating jacket, which can be heated with thermal oil to max. 350 °C, meanwhile the pressure in the dryer is reduced to < 100 mbar abs. by means of a vacuum pump, to accelerate the evaporation of the moisture. In the HTC-VT dryer the product is brought into a mechanical turbulence, operating on the hurling and whirling principle. That causes an intensive heat and material exchange. The entire product is dried homogeneously within a short period of time. The frequent load alternation (temperature as well as pressure) is a big challenge for the construction of the dryer, in particular for industrial scale machines. AVA supports customers with its comprehensive process and constructional knowledge to find the optimal solution for the drying of the flame retardants.
Flame retardants are chemicals which are added to flammable materials, e.g., plastics and textiles, in order to prevent or slow the further development of the flame in case of fire. Beside inorganic flame retardant (metal oxides and salts), organohalogen and organophosphorus compounds are the most important types of flame retardants. In comparison to the organohalogen compounds, the organophosphorus compounds have higher heat resistance and higher thermal stability. Especially in Europe, organophosphorus compounds are preferred.Click here for more information about AVA GmbH u. Co. KGClick here for related articlesFind manufacturers if dryers in our Equipment Guide
Sign up for Thermal Solids Processing E-Updates
Recent Thermal Solids Processing e-newsletters
Read our last “Thermal Solids Processing” e-newsletter campaigns here:
AVA GmbH & Co. KG, based in Herrsching am Ammersee, provides machines and system solutions for mixing, drying, and reaction processes. The product range of the company, which was founded in 1991, comprises both horizontal and vertical technologies. The in-depth process technology expertise held by a creative and highly experienced team, the outstanding ...