Search
Close this search box.

Sentry B1 Automatic Point Sampler

Sentry ISOLOK SAK Automatic Sampler
30 Jul 2020  |
OCONOMOWOC, WI - The Sentry B1 automatic point sampler automates sampling of dry free-flowing or non-free-flowing materials such as granules, powders, flakes and pellets from gravity lines, vertical chutes, sloping chutes and hoppers. A point sampler captures samples from a point in a process stream and often is used when the material is homogeneous.

To obtain a sample, the Sentry B1 sampler first cleans out the sample tube by running the auger in reverse. After purging, the auger is run in the discharge direction and the sample moves through the assembly to the discharge port. The product sampled is discharged through a flexible hose to a collection point. Sample volume can be changed at the sampler controller. The sample probe is always in the product stream.

With representative sampling, characteristics of each sample match that of the entire lot or batch – so samples are repeatable, leading to accurate sample analysis data. Automatic sampling ensures a sample can be easily and safely obtained with no need for direct human interface or interference. This ensures sample integrity as well as operator safety.

Share this article

This article is published by

Sentry engineers, manufacturers and services components for collecting representative samples of steam, water, gas, liquid, slurry and bulk solids. This enables analytical and operational professionals to gain samples safely and simply, and with repeatable results....

More from Sentry Equipment Corp

Related Articles